Make a Touch Lamp from the Electric Paint Lamp Kit

Blog navigation

Blog categories

View all categories

Search in blog

Latest posts

View all latest posts

Featured posts

View all featured posts

Blog tags

school thanksgiving giveaway circuit holiday 50ml events cold solder thank you lesson capacitive diy install tutorial electric paint cold setup 10ml cnc

Archived posts

 Blog Rss

548 Views Posted on: 06/08/2021

Whether you just completed the Electric Paint Lamp Kit Instruction Test Sheet or you want some visual reinforcement when making your Touch Lamp, this tutorial provides step-by-step videos to guide you in making the Touch Lamp. All you need is the Light Up Board, an Electric Paint 10mL Tube, and the Touch Lamp template and lampshade.

We recommend going through the Instruction Sheet first as it provides a tutorial to ensure that you are confident in applying Electric Paint and attaching the Light Up Board before you get started with the template.

Step 1: Apply Electric Paint

First, apply Electric Paint inside the grey outlines to fill in the connection and switch. The paint takes approximately 15 minutes to dry and must be completely dry before we attach the Light Up Board. In the meantime, we can start making the lampshade while we wait for the paint to dry. Just skip to Step 5 and come back later.

Step 2: Attach the Light Up Board

Once the paint has fully dried and isn't tacky anymore, it's time to attach the Light Up Board. Use the Twisting Skills that you have learned from the Instruction Test Sheet!

Step 3: Cold Solder

With the board in place, we can now cold solder. Blob a droplet of Electric Paint inside the sensor's E0, E9, and E10. This will ensure a robust connection between your paint and board. After you have applied the Electric Paint, we need to wait for the paint to dry for another 15 minutes.

Step 4: Test

When everything has dried, we should test it!. Connect the Light Up Board with the USB cable to a power source and touch the switch you have made with Electric Paint. The board should light up! If it works, you can disconnect the cable from the board for now. If it does not work, check to see if the painted areas have cracks in them, if they do apply some more Electric Paint to patch it up.

Step 5: Fold the lampshade

Now it is time for the lampshade! If you look at the lampshade. you can see that it has two dashed lines. You need to make a "mountain fold" for each of these. Take a look at the video to see how it is done.

Step 6: Attach the lampshade

There are two tabs on the lampshade. These are used to attach the lampshade onto the template sheet with the Light Up Board. Simply slide the tabs into each of the corresponding slits one at a time.

Step 7: Complete the lampshade and turn the Touch Lamp on

You can now connect the USB cable to the Light Up Board again. Fold the lampshade over and insert the two tabs into the slits Touch the switch and your board should light up! Congratulations, we have made our Touch Lamp! You can now hang it anywhere we want to have a light source. 

To learn more about the Electric Paint Lamp Kit: Click Here

Posted in: Learn, Bare Conductive, Electric Paint, Electric Paint Kits

Related posts