4 CH BI-DIRECTIONAL LOGIC LEVEL SHIFTER CONVERTER I2C SAFE

4-CHANNEL I2C-SAFE BI-DIRECT LOG. LEVEL CONVERTOR 4-CHANNEL I2C-SAFE BI-DIRECT LOG. LEVEL CONVERTOR 4-CHANNEL I2C-SAFE BI-DIRECT LOG. LEVEL CONVERTOR
All pictures are for illustrative purposes only.
4-CHANNEL I2C-SAFE BI-DIRECT LOG. LEVEL CONVERTOR 4-CHANNEL I2C-SAFE BI-DIRECT LOG. LEVEL CONVERTOR 4-CHANNEL I2C-SAFE BI-DIRECT LOG. LEVEL CONVERTOR

PID# 15259

CA$7.00
Free shipping: On orders over $120 within BC

4 In Stock

Order now, processed by tomorrow

Quantity

Request a large quantity quote

Description

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.

We do have some other handy level shifters in the shop, from the DIP 74LVC245 to the fancy bi-directional TXB0108. However, neither of these are happy to work with I2C, which uses a funky pull-up system to transfer data back and forth. This level shifter board combines the ease-of-use of the bi-directional TXB0108 with an I2C-compatible FET design following NXP's app note.

This breakout has 4 BSS138 FETs with 10K pullups. It works down to 1.8V on the low side, and up to 10V on the high side. The 10K's do make the interface a little more sluggish than using a TXB0108 or 74LVC245 so we suggest checking those out if you need high-speed transfer.

While we designed it for use with I2C, this works great for SPI, TTL Serial, and any other digital interface both uni-directional and bidirectional. Comes with a fully assembled, and tested PCB with 4 full bidirectional converter lines as well as 2 pieces of 6-pin header you can solder on to plug into a breadboard or perfboard.

BSS138 Datasheet
The newer NXP app note explaining how it works (the older Philips version of the app note is also worth a read)