USB A MALE TO UART MODULE W/ JUMPER WIRE

All pictures are for illustrative purposes only.

PID# 22130

CA$12.00
Out of Stock
Quantity

Request a large quantity quote

Description

Features At A Glance

  • Adopts new version CH343G chip. Compared with CH340G, it supports higher data rate (up to 6Mbps) and more serial port IO levels (5V / 3.3V / 2.5V / 1.8V)
  • Supports Mac, Linux, Android, Windows 7/8/8.1/10/11
  • Onboard resettable Fuse and Transient Voltage Suppressor, anti-overcurrent and anti-overvoltage, anti-surge, anti-static, improve shock resistance, stable and safe communication performance
  • Onboard IO protection circuits, anti-surge, anti-static, stable and safe communication performance
  • Onboard 3.3V and 5V TTL level switch pins for selecting TTL communication level
  • Support 3.3V/5V output (the module is powered by USB, and the onboard jumper should be shorted to 3.3V or 5V accordingly)
  • Adopts double-sided black immersion gold process, which is durable and has a good look
Specifications

HOST INTERFACE

USB

DEVICE INTERFACE

UART

COMMUNICATION RANGE

50bps ~ 6Mbps

USB DEVICE INTERFACE

connector: mini-USB, micro-USB, USB Type-A, USB Type-C;

protection: resettable Fuse, ESD protection

UART INTERFACE

connector: 6pin right-angle pinheader;

protection: IO protection diode
Multiple Protection Circuit, Safe And Stable

Onboard Resettable Fuse And Transient Voltage Suppressor, Prevent Overcurrent And Overvoltage, Improve Shock Resistance; Onboard IO Protection Circuit, Anti Surge, Anti-Static, Stable And Safe Communication Performance

Multiple Systems Support

Compatible With Popular Systems Like Win7/8/8.1/10/11, Mac, Linux, Android...

Interface Introduction
INDICATOR DESCRIPTION
PWR Power indicator, turn on when the voltage is detected from USB interface
RXD Receiving indicator, turn on when data is sent back from the device interface
TXD Sending indicator, turn on when data is sent from USB
Pinouts Definition
VCC 5V or 3.3V output for external device (configured by jumper)
GND Ground
TXD Connects to MCU.RXD
RXD Connects to MCU.TXD
RTS# Connects to MCU.CTS
CTS# Connects to MCU.RTS

Wiki: CH343_USB_UART_Board

Related products