DC MOTOR IN MICRO SERVO BODY, FM90, 5V 110PRM

All pictures are for illustrative purposes only.

PID# 4872

CA$4.50 EACH
Free shipping: On orders over $120 within BC

156 In Stock

Order now, processed next business day

Quantity

Request a large quantity quote

Description

  • Dimensions: 32.3mm x 12.3mm x 29.9mm / 1.3" x 0.49" x 1.2"
  • Spline Count: 21
  • Weight: 8.4g
  • No load speed: 110RPM (4.8v) / 130RPM (6v)
  • Running Current (at no load): 100mA (4.8v) / 120mA (6v)
  • Peak Stall Torque (4.8v): 1.3 kg/cm / 18.09 oz/in
  • Peak Stall Torque (6v): 1.5 kg/cm / 20.86 oz/in
  • Stall Current: 550mA (4.8v) / 650mA (6v)

This tiny DC Motor in Micro Servo Body is an interesting motor - it's the same size and shape as our micro servo but it isn't a servo. It's more like a DC motor + plastic gear-train in a box. It's not a super powerful motor, it would do well as a little robot wheel. It's also a lot less expensive than a micro servo (continuous or non-continuous) because there is no control board inside. Controlling speed is done by PWM'ing the power leads, controlling direction is done by swapping the power polarity - just like any brushed DC motor.

Runs from 4-6VDC, we've powered it with a Lipoly and 3 alkaline, or 4 NiMH batteries with success. You cannot control this directly from a microcontroller pin! You must have a H-bridge such as a L293DTB6612 or a Motor shieldMotor HAT or  DC Motor + Stepper FeatherWing.

Motor comes with 2x screws and 2x nuts for mounting to a chassis. No flanges or horns included - it's intended to mate with our little wheels, there's a screw to attach once they're plugged together. Build a robot vehicle of your own with these little motors driving it!

You may also like