UNI-T DIGITAL OSCILLOSCOPE, UPO1104X, 100MHz 4CH 2GSa/s

All pictures are for illustrative purposes only.

PID# 19941

CA$915.00
Out of Stock
Quantity

Request a large quantity quote

Description

UPO1000s Series Digital Phosphor Oscilloscope
UPO1000 series digital phosphor oscilloscope adopts UNI-T 3D technique 1)Ultra Phosphor 2.0 with new
2)appearance upgrade and the function of deep storage, high waveform capture rate, real-time waveform recording and playback and 256-level grayscale display.
3)The series is equipped with three levels of bandwidth of 50MHz/100MHz/200MHz, real-time sampling rate up to 2GSa/s.
4)The whole series are equipped with 4 channels, the maximum storage depth is 56Mpts, up to 500,000wfms/s in Fast Acquire mode. Hardware real-time waveform uninterrupted recording and waveform analysis up to 120,000 waveform frames; support independent DVM module, rich trigger and bus decoding functions, and support full memory hardware real-time decoding.
5)It widely used in many fields, including communication, semiconductor, computer, IC design, instrumentation, industrial electronics, consumer electronics, automotive electronics, field maintenance and R&D/education.

Features and Merits

 Analog channel bandwidth: 100MHz (UPO1104X)
 Analog channel number: 4
 Maximum sampling rate: 2GSa/s
 Vertical scale: 500μV/div-20 V/div
 Low-base noise :<100μVrms
 Maximum storage depth upto 56Mpts
 Waveform capture rate of upto 500,000 wfms/s
 The hardware can be continuous waveform recording 120,000 frame in real time
 Automatic measurement of 36 waveform parameters, the measurement range divides into screen and cursor area
 Supports 7digits hardware frequency meter measurement
 DVM supports AC/DC TRMS (true virtual value) measurement
 Waveform calculation function (FFT, add, subtract, multiply, divide, digital filter, logical operation and advanced operation)
 1M sampling points to enhance FFT function, it supports frequency setting, waterfall curve, demodulation mode and marker measurement
 Multiple trigger functions (edge, pulse width, video, slope, runt pulse, over-amplitude pulse, delay ,timeout, duration, setup hold, Nth edge and code pattern)
 Supporting RS232, I 2 C, SPI trigger
 Innovative RS232, I 2 C, SPI fullmemory hardware for real-time decoding
 Ultra phosphor display effect, 256 grayscale display
 7 inch WVGA(800×480)TFT LCD
 Multiple interfaces: USB Host, USBDevice, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail, DVM)
 Supporting waveform navigation, marker and segment
 Supporting SCPI programmable standard command
 Support WEB access and control