OLED DISPLAY HAT, RASPBERRY PI, 1.3INCH, W/SPI, 128X64

All pictures are for illustrative purposes only.

PID# 1801

CA$19.50 EACH
Out of Stock
Quantity

Request a large quantity quote

Description

Overview

This is an OLED display HAT for Raspberry Pi, 1.3inch diagonal, 128x64 pixels, with embedded controller, communicating via SPI or I2C interface.

Trying to add a control interface for your Pi? This compact display would be the ideal choice.

Features

  • Standard Raspberry Pi connectivity, compatible with and direct-pluggable onto Raspberry Pi 2B/3B/Zero/Zero W
  • Optional interfaces: 4-wire SPI, 3-wire SPI, I2C, configured via onboard resistor
  • 1x joystick (5-position), 3x pushbuttons, handy and useful
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Specifications

  • Driver: SH1106
  • Interface: 4-wire SPI, 3-wire SPI, I2C
  • Display color: blue
  • Resolution: 128x64
  • Operating voltage: 3.3V

Interface

SYMBOLRaspberry Pi PIN (BCM)DESCRIPTION
KEY1 P21 Button 1/GPIO
KEY2 P20 Button 2/GPIO
KEY3 P16 Button 3/GPIO
Joystick Up P6 Joystick Up
Joystick Down P19 Joystick Down
Joystick Left P5 Joystick Left
Joystick Right P26 Joystick Right
Joystick Press P13 Joystick Press
SCLK P11/SCLK SPI clock input
MOSI P10/MOSI SPI data input
DC P24 Data/Command selection (high for data, low for command)
CS P8/CE0 Chip selection, low active
RST P25 Reset, low active

Dimensions

1.3inch OLED HAT dimensions

Development Resources

Wiki : www.waveshare.com/wiki/1.3inch_OLED_HAT

PACKAGE CONTENT

Weight: 0.012 kg

  1. 1.3inch OLED HAT x1
  2. RPi screws pack (2pcs) x1
1.3inch-OLED-HAT-1_93.jpg
RPi-screws-pack-8-x2.jpg