M-DUINO PLC ARDUINO ETHERNET & LoRa (868 - 915MHz) 42 I/Os

All pictures are for illustrative purposes only.

PID# 160695

CA$625.00
Out of Stock
Quantity

Request a large quantity quote

Description

Inputs, Outputs, Communications and other technical specifications

Inputs (Arduino Mega included)

  • 25 Inputs:

                (x12) Analog (0-10Vdc) / Digital (5-24Vdc) configurable by                 software.

                (x13) Digital Isolated (5-24Vdc) (x3 of which can work as                 Interrupt).

Communications

– (1x) Ethernet port.

- (1x) LoRa. 2 different selectable options: 868MHZ to Europe and 915MHz to America

– (1x) USB port (type B).

– (1x) I2C port. (Interface with other Industrial Shields, sensors, I/Os modules)

– (3x) TTL ports.

– (1x) RS-232 port.

– (1x) HALF/FULL Duplex RS-485 port.

– (1x) SPI external port (Using MOSI,MISO, SS pins of Arduino)

– TCP IP / Modbus TCP. / Modbus RTU

– WebServer capacity

– Industrial Protocols

 

 

Outputs (Arduino Mega included)

  • 16 Outputs:

                (x6) Digital Isolated (5-24Vdc) / Analog (0-10Vdc)                 configurable by switch.

                (x10) Digital Isolated (5-24Vdc)

                

Other technical specifications

RTC (Real Time Clock. NOTE: I2C port used. See pinout modification)

µSD Socket (using SPI port, chip select D53 pin).

100x75x115mm

DIN Rail mounting.

Max consum.: 1.2A

Flash Memory: 256kB (8kB for bootloader)

SRAM: 8kB

EEPROM: 4kB

Clock Speed: 16MHz

*Rx,Tx pins are not abailable using RS485. For SPI you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino)

Lora Arduino PLC details

Industrial Automation, Monitoring and Control

Modular PLC
This is the first equipment based on the Arduino technology designed for a professional use. This PLC has 41I/Os. It also contains several communication ports which provide more flexibility and control. The M-DUINO family offers the possibility to expand up to 127 modules through I2C, which means that you can have until 7100 Inputs / Outputs in Master-Slave connections, additionally to sensors, etc…

Programming Software
This PLC can be programmed using the Arduino IDE platform. See the Documentation menu below to download the software for free.

Instantaneous connection and coding
The PLC M-DUINO is programmed through the USB ports. This PLC can also be programed through Ethernet port remotely. This offers and immediate access to program, mantain and control. Also you can continuously monitor the status for all the variables, inputs, outputs, etc. It is compatible with the Arbosx and the Touchberry Pi with instantaneous connection.

SPECIFICATIONS:

Inputs:

Total Inputs 25
Total Digital Optoisolated Inputs (5-24Vdc) 13
     Digital Optoisolated Inputs (5-24Vdc) 10
     Digital Optoisolated Inputs (5-24Vdc) | can work like interrupt Inputs INT (5-24Vdc) 3
10 bit Analog Inputs (0-10V) | Digital (5-24Vdc) Inputs configurable by software 12

Inputs notes - * From the (Xx) Digital, (Yx) can be configured as Analog (Xx = Total Digital In, Yx = Number of Analog In) * From the (Xx) Digital, (Zx) can be configured as Interrupt (Xx = Total Digital In, Zx = Number of Interrupt pins)

Outputs:

Total Outputs 16
Digital Optoisolated Outputs (5-24Vdc) 10
Digital Optoisolated and PWM (5-24Vdc) | 8 bit Analog (0-10V) Outputs configurable by switch 6
Relay Outputs (220Vac - 5A)

Communications:

Ethernet communication 1
Wi-Fi & BLE (Bluetooth Low Energy) NO
GPRS/GSM NO
LoRa 1
DALI NO
USB port (type B) communication (for uploading or debugging only) 1
Micro USB port (type B) communication (for uploading or debugging only) 0
I2C communication (interface with other Industrial Shields, sensors, I/Os modules) 1
Serial TTL (UART) communication 3
RS-232 communication 1
Half/Full Duplex RS-485 communication 1
SPI external port communication (using MOSI, MISO, SS pins of Arduino) 1
RTC (Real Time Clock. NOTE: I2C port used. See pinout modification) YES
µSD Socket (using SPI port, chip select D53 pin) YES

Communications notes - * When using I2C, 2 inputs are lost

The Open Source Board CPU 

Single Board Computer (SBC) Microcontroller Arduino Mega Original Board (ATmega 2560)
Flash Memory (KB) 256
Flash Memory of which used by bootloader (KB) 8
SRAM (KB) 8
EEPROM (KB) 4
Clock Speed (MHz)  16

Certification & Safety:

Conformity with Health, Safety, and Environmental Protection (CE) EN61010-1 | EN61010-2-201 | EN61131-2:2007 (Clause 8: Zone A/B EMC and clause 11:LVD) | EN61000-6-4:2007 + A1 2011 (Emissions) | EN 61000-6-2:2005 (Immunity)
Medical Devices Directive (CE) 93/42/EEC
FCC Federal Code of Regulation (CFR) for Electronic Equipment EMC:FCC Part 15
RoHS Directive 2002/95/EC | Restriction of Hazardous Substances (EEE)

Other Information:

PLC measures 101X119.3x119.5
DIN Rail mounting
Max. consum. 1.5A
Power Supply Voltage (Vdc) Range 12-24
Power Consumption (VAC max.) 30
Operating Temperture ºC 0ºC-60ºC
Operating Temperature ºF 32ºF-140ºF
Operating Relative Humidity % (no condensation) 10%-90%
Package Size 13cm x 14cm x 13cm
Packaging Box
ECCN Number EAR99H
HTS Code 8537.10.10.90
740.17 Language - 740.17 (b)(1) for self-classification or (b)(3) CCATS issued §740.17 (b)(1)
Country of Origin Spain
STATIC Sensitive NO
Moisture Sensitivity Level (MSL) MSL 1 - Unlimited
Lead Free
RoHS Compliant by Exemption? NO
Does Part Contain Lithium? YES

Other Technical Specifications: *Rx,Tx pins are not available using RS485. For SPI you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino).

How to Start:

1. Download the open-source software "Arduino IDE" version 1.8.0 or higher and open it.
2. Click on "File" and then on "Preferences".
3.  See the "Additional Boards Manager URLs:" text box inside the "Settings" tab and add this URL: http://apps.industrialshields.com/main/arduino/boards/package_industrialshields_index.json
4. Close the preferences window with the “Ok” button.
5. Click on “Tools” menu , and open the “Boards” submenu, and click the “Boards Manager” option, to open the Boards Manager window.
6. Search “industrialshields” to the search filter and select to the list and click “Install” or "Update" if you have not got the latest version.
7. Close the "Boards Manager". Now you can select each of our PLCs by clicking on "Tools", then "Board", then "Industrial Shields Boards" and select your family of PLCs. Contact support@industrialshields.com if you have any questions."

Related products