PUSH BUTTON IP67 WATERPROOF MOMENTARY RED SOLDER TAP
POWER ADAPTER, AC/DC, SWITCHING, 18V, 3A, CEN +
PANEL METER, 44C2-A, 50UA
PANEL METER, 44C2-A, 500UA
LED WIFI 5 IN 1 SMART CONTROLLER RGB/ RGBWW/CW
MINI AUDIO SYNC MUSIC TESLA COIL KIT WITH POWER SUPPLY
POLYESTER FILM CAP 63V 1F 5%
ROCKER ROUND ON-OFF, DPST, 20A, 250V, WHITE
TUBE PRE-AMP PH-5L 6JI X 2
TRANSFORMER 16.5VAC 40VA 68-162AS-1
IWISS CRIMPING TOOL IWS-2820M 28AWG-20AWG
IWISS CRIMPING TOOL LY-2546B 2.5/4/6MM2 MC4
IWISS FERRULE CRIMPING TOOL PZ 0.5-2.5
DIY KIT 4 DIGIT CLOCK WITH TEMPERATURE DATE TIME DISPLAY
TACTILE SWITCH WITH RED LED
TACTILE SWITCH WITH BLUE LED
TACTILE SWITCH WITH GREEN LED
TACTILE SWITCH WITH ORANGE LED
TACTILE SWITCH WITH WHITE LED
SHAFT COUPLER, 5MM TO 8MM
HEX KEY AND SET SCREW SET
USB BUS TRANSFER MODULE PROGRAMMER RS232/RS485/RS422
STEPPER MOTOR MOUNTING BRACKET (NEMA 17)
BRUSHLESS MOTOR DRIVER FOR A2212
MINI BLINKING/FLASHING LED WITH SWITCH
SHAFT COUPLING UNIVERSAL JOINT 5MM TO 8MM
ALUMUNUM HEAT SINK WITH EXTRUDED RAILS 40MMX40MM
METAL RC 25T M3 SERVO ARM HORN
3D PRINTER THREADED ROD 304 M3X250MM
MULTI SOCKET POWER BAR 3 OUTLET (ON/OFF) WITH 2 USB
GEAR MOTOR 12V 100RPM 37GB
BATTERY, RECHARGABLE, AAA NiCd 1.2V 700MAH
TOOL, RDEER, WIRE CUTTER, 7", 175MM
TOOL, WIRE CUTTER, RDEER, 8", 200MM
BATTERY LITHIUM POLYMER 7.4V 2200MAH 25C JST
BATTERY LITHIUM POLYMER 7.4V 2200MAH 20C JST
SHAFT COUPLER, 6.35MM TO 8MM
VANDAL MOMENTARY PUSH BUTTON SPDT 12V BLUE LED 16X38MM
VANDAL MOMENTARY PUSH BUTTON SPDT 12V GREEN LED 16X38MM
THERMAL CUTOFF 250V 5A 125C(KSD-125C)
3.5MM 3-POLE INLINE JACK
LED 100W COOL WHITE 6500 - 7000K 3V - 36V EMITTER
RELAY, D3062, 12VDC, 2A, DPDT, NON-LATCH
HDMI OVER NETWORK TCP/IP LAN EXTENDER 100M W/ IR TRANSMITTER
WELLER, 5-40W VARIABLE SOLDERING STATION, WCL100CUL
TOOL, BUTANE GAS REFILL, 70ML
BENCHTOP, FUME EXTRACTOR, SMOKE ABSORBER, WSA350
WELLER, SOLDER, DESOLDER, REWORK STATION, 3-IN-1, WT1013N
WELLER, SOLDERING IRON, /W LED LIGHT 25 LUMENS, 25W
WELLER, SOLDERING IRON, /W LED LIGHT 25 LUMENS, 40W
WELLER, SOLDERING IRON, /W LED LIGHT 25 LUMENS, 80W
XCELITE, WIRE STRIPPER, 5", 8 AWG RANGE, 101SNV
XCELITE, WIRE STRIPPER AND CUTTER, 5.25" , 8 AWG, 103SNV
XCELITE, DIAGONAL SHEAR CUTTER, 5", FLUSH JAW, 20 AWG
HIGH VOLTAGE RECTIFIER DIODE BY711 16KV 3MA
PUSH BUTTON SWITCH ON/OFF 10MM YELLOW SPDT 12V LIGHT
TOTEN 2U HINGED EXTENDABLE BRACKET
AUTO LIGHTER PLUG W/CURLY CORD, RIGHT-ANGLE 1.3MM
POWER RESISTORS 50W 16OHM WIREWOUND W/ HEAT SINK
AUDIO CABLE, 1/4" TO 1/4" MONO, 3FT (RIGHT ANGLED)
VANDAL MOMENTARY PUSH BUTTON SPDT 24V RED LED 22X45MM
VANDAL ON/OFF PUSH BUTTON SPDT 24V BLUE LED 22X45MM
VANDAL ON/OFF PUSH BUTTON SPDT 24V WHITE LED 19X40MM
VANDAL ON/OFF PUSH BUTTON SPDT 24V GREEN LED 22X45MM
Product ID: 427
DeoxIT contact cleaner dissolves oxides and sulfides that form on metal surfaces. This restores the contact’s integrity and leaves a thin microscopic layer that protects the metal. Special additives prevent dissolved oxides from re-attaching, keeping them in suspension and allowing them to be easily dispersed by the mechanical action of the contact.
Product ID: 16292
The 8242-W LCD Cleaning Wipes are individually sealed packs of cleaning wipe. The wipes are made of a durable biodegradable paper that prevents premature ripping during usage. The gentle formula of these specialty wipes will clean effectively without leaving streaks.
Product ID: 15915
MG Chemicals Carbon Conductive Grease is an economical electrically conductive silicone grease formulated for improving electrical connections between sliding surfaces and parts. It provides excellent lubrication, inhibits corrosion, and repels humidity. It can also act as a gasket in EMI shielding applications.
Product ID: 16240
This is a two-part, smooth, dark grey paste that cures to form a hard, durable polymer that is extremely thermally conductive, yet electrically insulating.
Product ID: 16247
The 422B Silicone Modified Conformal Coating is a clear and flexible coating that is ideal for protecting electronic circuits in high temperature environments or applications requiring extreme flexibility.
Product ID: 16248
The 841 Super Shield Conductive Coating reduces electromagnetic or radio frequency interference (EMI/RFI), an issue for all electronic devices.
Product ID: 16239
This is a two part epoxy with a 1:1 mix ratio and a 5 minute working time conveniently packaged in a dual syringe. It bonds well to metal, wood, ceramics, and some plastics.
Product ID: 15483
This item is not available for individual sales due to MG Chemical sales restriction. The 838 Total Ground Carbon Conductive Coating is an economical, acrylic paint that is used to create conductive, static free surfaces with excellent characteristics. Coated surfaces reduce electromagnetic or radio frequency interference (EMI/RFI). The carbon in the...
Product ID: 432
This item is not available for individual sales due to MG Chemical sales restriction. Ideal for high temperature environments. Silicone Conformal Coating (422B) is a flexible finish product that provides a protective coating for printed circuit boards against moisture, corrosion, and thermal shock.
Product ID: 4810
MG Chemicals cold spray is 100% HFC 134A non-flammable gas. It is primarily used for diagnosing thermally intermittent problems with electronic devices, but it is also useful for protecting heat sensitive components during soldering, quickly cooling solder joints, and it can also be used to quickly remove gum and other adhesives from a variety of surfaces.
Product ID: 4331
MG Chemicals 832C Translucent Epoxy Encapsulating and Potting Compound is simple to mix, easy to use, provides great protection, and good value. It protects against static discharges, shocks, vibrations, and mechanical impacts. It insulates against heat and conductivity. It is extremely resistant to environmental humidity, salt water, and many harsh...
Product ID: 488
For removing exposed resist during the positive photofabrication process. Disolves exposed photoresist Concentrated formulation - dilute one part developer to ten parts water For best results, use in conjunction with M.G. Foam Brush (Cat. No. 416-S) Also available in the M.G. Photofabrication Kit (Cat. No. 416-K) .
Product ID: 15916
MG Chemicals Carbon Conductive Assembly Paste is an electrically conductive, non-bleeding grease for improving electrical connections between non-moving surfaces and parts. It was designed to work in the same manner as a heat sink grease, only electrically conductive. It is also good for globbing on bus-bars and other applications where a flowable grease...
Product ID: 424
PLASTIC & GLASS CLEANER 825-500G An all-purpose, non-streaking, and high foaming action glass cleaner. It can be used safely on plastic, vinyl, metal, glass, chrome, and ceramics, leaving surfaces bright and clean.
Product ID: 433
Features: Non-porous, water & chemical resistant Impact resistant (contains a form of nylon) Affords high security, once cured, extremely difficult to remove Non-conductive, an electrical insulator Suitable for explosion proof components (spark arresting) Easy & simple to mix, low toxicity Long pot life, cures in one hour at 65°C...
Product ID: 15197
CHEMICAL, POLYMORPH - 250G. Polymorph is a non-toxic, biodegradable polyester with a low melting temperature of about 60°C (140°F). Prototype plastic parts can be made by simply heating the plastic beads in hot water until they turn clear and then kneading them together and shaping by hand.
Product ID: 15196
KIT, CHIPQUIK SMD REMOVAL KIT. The CHIP QUIK® SMD Removal Kit is a quick and inexpensive way to remove SMD components from a PCB without a hot air station using only your soldering iron. The heart of the kit is a length of Chipquik low temperature alloy.
Product ID: 151970
CHEMICAL, POLYMORPH - 1000G. Polymorph is a non-toxic, biodegradable polyester with a low melting temperature of about 60°C (140°F). Prototype plastic parts can be made by simply heating the plastic beads in hot water until they turn clear and then kneading them together and shaping by hand.
Product ID: 4324
Removes protective coatings, including epoxy, urethane, silicones, and acrylics. Also removes carbon, tar, adhesives, rubber, and some plastics. Extra Strength Non-flammable Non-drip (gel type) Safe on metals Avoid contact with skin Available Sizes Catalog NumberSizes AvailableDescription 8310-55ML 55 ml (2 oz) Liquid