HEAT SHRINK, 3/16"(4.8mm), 3:1, DUAL WALL, W/SILICONE, BLACK

All pictures are for illustrative purposes only.

PID# 10706

4,70 CA$/M
Free shipping: On orders over $120 within BC
Variants:
HEAT SHRINK, 3/16"(4.8mm), 3:1, DUAL WALL, W/SILICONE, BLACK
HEAT SHRINK, 3/16"(4.8mm), 3:1, DUAL WALL, W/SILICONE, WHITE
HEAT SHRINK, 3/16"(4.8mm), 3:1, DUAL WALL, W/SILICONE, CLEAR
HEAT SHRINK, 3/16"(4.8mm), 3:1, DUAL WALL, W/ SILICONE, RED
Quantité

Request a large quantity quote

Description

Dual Wall Adhesive-Lined Heat-Shrink Polyolefin Tubing

Adhesive lined heat shrink tubing with environmental sealing capability for a wide variety of electrical applications, including automotive and marine wire harness, wire splices, breakouts, and connector-to-cable transitions.

Features

 

  1. 3:1 shrink ratio
  2. Low longitudinal shrinkage
  3. Flame retardant (out jacket only) 
  4. Super sealing against water, moisture or other contaminates 
  5. Continuous operating temperature : -45℃-125℃ 
  6. Shrink Temperature:125℃

Technical Data

PropertyTest methodStandard Performance
Tensile strength(MPa) ASTM D 2671 ≥ 10.4
Elongation(%) ASTM D 2671 ≥ 300
Tensile strength after aging(Mpa) UL224 158 ℃*168hr ≥ 7.3
Elongation after aging (%) UL224 158 ℃*168hr ≥ 200
Flammability ASTM D 2671 B Self-extinguish within 30s
Dielectric strength(kV/mm) IEC 60243 ≥ 15
Volume resistivity( Ω .cm) IEC 60093 ≥ 1*1014

Adhesive

PropertyTest methodStandard Performance
Water Absorption ASTM D 570 < 0.2
Softening Point( ℃ ) ASTM E 28 95
Strength of pearing (PE) ASTM D 1000 120N/25mm
Strength of pearing (Al) ASTM D 1000 80N/25mm

Specification Table / Order Guide ( if large quantity is needed ) 

SizeExpandedAfter RecoveryStandard Package
InchmmInternal Diameter  (mm)Internal Diameter  (mm)Total Wall Thickness  (mm)Adhesive Thickness  (mm)Spool Length M/spool
3/32 2.4 2.4 0.8 0.80±0.30 0.40±0.20 200
1/8 3.2 3.2 1.0 0.90±0.30 0.40±0.20 200
3/16 4.8 4.8 1.6 1.05±0.30 0.40±0.20 100
1/4 6.4 6.4 2.2 1.25±0.30 0.45±0.20 100
5/16 7.9 7.9 2.7 1.35±0.30 0.50±0.20 100
3/8 9.5 9.5 3.2 1.45±0.30 0.50±0.20 50
1/2 12.7 12.7 4.2 1.65±0.30 0.50±0.20 1.22 OR 25M/Roll
5/8 15 15 5.2 1.80±0.30 0.55±0.30 1.22 OR 25M/Roll
3/4 19.1 19.1 6.3 1.95±0.30 0.60±0.30 1.22 OR 25M/Roll
1 25.4 25.4 8.5 2.00±0.40 0.60±0.30 1.22 OR 25M/Roll
1-1/4 30 30 10.2 2.15±0.40 0.65±0.30 1.22 OR 25M/Roll
1-1/2 39 39 13.5 2.45±0.40 0.60±0.30 1.22 OR 25M/Roll
2 50 50 17 2.75±0.40 0.75±0.30 1.22 OR 25M/Roll
5/2 64 64 21 3.05±0.40 0.80±0.30 1.22 OR 25M/Roll
3 75 75 25 3.05±0.40 1.05±0.40 1.22 OR 25M/Roll
7/2 90 90 30 3.10±0.50 1.05±0.40 1.22 OR 25M/Roll
4 100 100 34 3.10±0.50 1.05±0.40 1.22 OR 25M/Roll
5 125 125 42 3.10±0.50 1.10±0.40 1.22 OR 25M/Roll

Specifications

60 Produits

Features

Colour Black
Diameter 4.8mm

Références spécifiques