MINI SOLAR LIGHT CHARGING MODULE, 5-7Vin / 3.7Vout 600mA

All pictures are for illustrative purposes only.

PID# 18598

CA$5.00
Free shipping: On orders over $120 within BC

5 In Stock

Order now, processed by tomorrow

Quantity

Request a large quantity quote

Description

Feature:

1. Versatile Charging: Works with multiple battery types (3.2V, 3.7V, 4V, 11.1V and 12V) and suitable for a range of small solar-powered LED lighting products.

2. Automatic Lighting Control: Turns on automatically at night and off during the day, offering hands-free energy savings.

3. Voltage Output Matches Battery Voltage: The output matches the battery's voltage, ensuring optimal performance and longevity. This product automatically adjusts its output to match the battery's voltage, ensuring maximum efficiency and minimizing wear and tear on the battery.

4. Non-Photovoltaic Detection Circuit: Controlled by detecting changes in solar panel-generated voltage, eliminating the need for expensive photoelectric devices.

5. Wide Range of Applications: Suitable for lawn lights, landscape lights, courtyard lights, stairs lights, DIY lights, path lights, and decorative lights.

Specification:

Color: Green

Material: PCB

Size: About 31x18mm/1.22x0.71inch

Weight: 5g

Kind reminder:

The battery voltage must match the voltage and power of the solar panel

The working voltage and power of the LED output terminal must correspond to the battery voltage

Wiring method:

1. B+B_ Connected to lithium battery

2. S+S - Connected to solar panels

3. L+L-connected output

Preventive measures:

1. The stable working output current of the control board should not exceed 600ma, otherwise it may cause output protection

2. Lithium batteries must be equipped with corresponding protection plates to prevent charging backflow and no overcharging or discharging protection. (Mobile phone batteries have 3.7V protection, but 18650 and above do not. 3.7V protection plates cannot be used in series)

3. Pay attention to waterproofing and insulation

4. LED lamps cannot use boost drive

5. The battery voltage of the controller is the output voltage, which is infinitely limited by current and voltage. 2V3V LED beads cannot be directly used and need to be driven by a step-down constant current or series current limiting resistor. The output current is the maximum working current, not a constant current

Special reminder:

1. The output power is the actual power, please confirm the actual power consumption of the load before use

2. Directly connecting to a 3Vled may damage the controller or LED

3. The battery must be equipped with a protective plate, and the battery voltage must match the open circuit voltage of the solar panel

Note:

Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!

Please allow 1-2cm measuring deviation due to manual measurement.

Related products