.png)
All pictures are for illustrative purposes only.
-
close -
-
-
-
-
-
-
-
-
-
-
-
-
-
Featured Items
-
-
-
-
-
-
-
More mirco-controllers
-
More Developement Tools
-
-
More Prototyping
-
More Modules
-
-
Featured Items
-
More prototyping Tools
-
-
-
-
-
-
-
-
Featured Item
-
-
-
-
-
-
-
Featured Items
-
-
-
-
-
-
-
-
Featured Items
-
-
-
-
-
-
-
-
-
-
-
-
-
Featured Items
-
-
-
-
-
-
-
-
-
Featured Items
-
-
-
-
-
-
Popular Cleaners
-
-
-
Featured Items
-
-
-
-
-
-
-
Featured Items
-
-
-
-
-
Featured Items
-
-
-
-
Featured Products
-
-
-
-
-
more motor
-
-
more power supplies
-
-
Featured Items
-
-
-
more electrical devices
-
-
-
-
-
-
-
Featured Items
-
-
-
-
-
-
-
-
-
-
-
FEATURED POSTS
-
-
-
HEAT SHRINK, 1/4"(6.4mm), 3:1, DUAL WALL, W/ SILICONE, RED
Description
Adhesive lined heat shrink tubing with environmental sealing capability for a wide variety of electrical applications, including automotive and marine wire harness, wire splices, breakouts, and connector-to-cable transitions.
Features
● 3:1 shrink ratio
● Super sealing against water, moisture or other contaminates
● Continuous operating temperature:-45℃-125℃
● Fully shrink temperature:≥125℃
Technical Data
| Property | Test method | Standard | Typical Performance |
|---|---|---|---|
| Tensile strength(MPa) | ASTM D 2671 | ≥ 10.4 | 13.78 |
| Elongation(%) | ASTM D 2671 | ≥ 200 | 460.62 |
| Tensile strength after aging(Mpa) | UL224 158 ℃X168hr | ≥ 7.3 | 11.34 |
| Elongation after aging (%) | UL224 158 ℃X168hr | ≥ 100 | 398.28 |
| Flammability | ASTM D 2671B | Pass | Pass |
| Dielectric strength(kV/mm) | IEC 60243 | ≥ 15 | 17.36 |
| Volume resistivity( Ω .cm) | IEC 60093 | ≥1 X1014 | 2.24X1014 |
Adhesive
| Property | Test method | Standard |
|---|---|---|
| Water Absorption | ASTM D570 | ＜ 0.2% |
| Softening Point( ℃ ) | ASTM E28 | 95±5 |
| Strength of pearing (PE) | ASTM D 1000 | 120N/25mm |
| Strength of pearing (Al) | ASTM D 1000 | 80N/25mm |
Sizing Chart (available for special order, please call us)
Size | Expanded | After Recovery | ||||
|---|---|---|---|---|---|---|
| Inch | mm | Inner Diameter Min(mm) | Inner Diameter Max(mm) | Total Wall Thickness (mm) | Adhesive Thickness (mm) | |
| 3/32 | 2.4 | 2.4 | 0.8 | 0.80±0.30 | 0.40±0.20 | |
| 1/8 | 3.2 | 3.2 | 1.0 | 0.90±0.30 | 0.40±0.20 | |
| 3/16 | 4.8 | 4.8 | 1.6 | 1.05±0.30 | 0.40±0.20 | |
| 1/4 | 6.4 | 6.4 | 2.2 | 1.25±0.30 | 0.45±0.20 | |
| 5/16 | 7.9 | 7.9 | 2.7 | 1.35±0.30 | 0.50±0.20 | |
| 3/8 | 9.5 | 9.5 | 3.2 | 1.45±0.30 | 0.50±0.20 | |
| 1/2 | 12.7 | 12.7 | 4.2 | 1.65±0.30 | 0.50±0.20 | |
| 5/8 | 15 | 15 | 5.2 | 1.80±0.30 | 0.55±0.30 | |
| 3/4 | 19.1 | 19.1 | 6.3 | 1.95±0.30 | 0.60±0.30 | |
| 1 | 25.4 | 25.4 | 8.5 | 2.00±0.40 | 0.60±0.30 | |
| 1-1/4 | 30 | 30 | 10.2 | 2.15±0.40 | 0.65±0.30 | |
| 1-1/2 | 39 | 39 | 13.5 | 2.45±0.40 | 0.60±0.30 | |
| 2 | 50 | 50 | 17 | 2.75±0.40 | 0.75±0.30 | |
| 5/2 | 64 | 64 | 21 | 3.05±0.40 | 0.80±0.30 | |
| 3 | 75 | 75 | 25 | 3.05±0.40 | 1.05±0.40 | |
| 7/2 | 90 | 90 | 30 | 3.10±0.50 | 1.05±0.40 | |
| 4 | 100 | 100 | 34 | 3.10±0.50 | 1.05±0.40 | |
| 5 | 125 | 125 | 42 | 3.10±0.50 | 1.10±0.40 | |
Specifications
