USB PD TRIGGER CHARGER, XY-WPDT, VOLT/AMP METER

All pictures are for illustrative purposes only.

PID# 18016

20,00 CA$
Rupture de stock
Quantité

Request a large quantity quote

Description

XY-WPDT is a PD-Fast-Charger Trigger. It can make a PD charger becomes DC 4V~20V adjustable power supply module.It supports PD2.0 and PD3.0 protocol.
Features:
- PD-Fast-Charger Trigger
- Voltage and current display
- Multi-set voltage output
- Power-off memory function
Specifications:
Output Voltage:DC 4.0V~20V
Voltage Precision:0.3%
Voltage Resolution:0.01V
Current Precision:0.5%
Current Resolution:0.001A
Working Temperature range:-20℃~100℃
Working Humidity range:0%-95%RH
Size:70*25*9mm
Set Mode:
    1>.Boot display:Automatically detect the PD fast charging protocol every time after power is turned on.
        1.1>.Input device don’t support PD protocol if display ‘----’.
        1.2>.Input device supports PD2.0 protocol.
        1.3>.Input device support PD3.0 protocol.
    2>.Switch display parameter:
        2.1>.Short press K1 button to switch display output voltage or output current or both in turns.
        2.2>.Keep press K1 button about 5second to turn OFF screen and indicator.But XY-WPDT keeps output voltage.
    3>.Adjust voltage grade:
        3.1>.Short press K2 button to set voltage grade.The corresponding voltage grade indicator will flash automatically.
        3.2>.Short press K1 or K2 button to change voltage value. K1 is increase and K2 is decrease in this time.
        3.3>.There are 7 voltage grade P7-1 to P7-7 and P7-L. It will display voltage grade and then display corresponding voltage value.
        3.4>.Keep press K1 button about 2second to save parameters and exit(Or without any operation within 5second).
        3.5>.P7-L is the last voltage grade. Module will trigger all grades(5V/9V/12V/15V/PPS-Mode) in turns if selected this grade. Three LED indicator will lit in turns and this mode can be used for factory of charger.
        3.6>.PD2.0 charger generally supports 4~5 voltage grades so screen will display P4-1 or P5-1.
        3.7>.PD3.0 charger generally supports 6~7 voltage grades so screen will display P6-1 or P7-1.
        3.8>.P7-1 output 5V.Yellow/Blue/Green indicator keep OFF.
        3.9>.P7-2 output 9V.Yellow/Blue/Green indicator keep OFF.
        3.10>.P7-3 output 12V.Yellow/Blue/Green indicator keep OFF.
        3.11>.P7-4 output 15V.Yellow/Blue/Green indicator keep OFF.
        3.12>.P7-5 output 5V.Yellow/Blue/Green indicator keep OFF.
        3.13>.P7-6 is PPS mode.Yellow/Blue/Green indicator keep ON.
        3.14>.P7-7 is PPS mode.Yellow/Blue/Green indicator keep ON.
        3.15>.P7-L is in turns mode.
    4>.Set PPS step voltage:
        4.1>.Make sure XY-WPDT is working at PPS mode which 1V/100mV/20mV indicator all or anyone lit which is the P7-6 or P7-7 voltage grade.
        4.2>.Keep press K2 button about 3second to adjust PPS voltage and screen will flashing.First activate the 1V step voltage.
        4.3>.Keep press K2 button about 3second to select next step voltage.
        4.4>.Short press K1 or K2 button to change voltage value. K1 is increase and K2 is decrease in this time.
        4.5>.Short press K1/K2 to exit PPS step voltage set mode and to select others  step voltage when 1V/100mV/20mV indicator both keep ON.
        4.6>.Keep press K1 button about 2second to save parameters and return to normal display(Or without any operation within 5second).
Application:
    1>.Router
    2>.Optical modem
    3>.Set-top box
    4>.Laptop
    5>.Charger converter
    6>.Charger tester
    7>.Charger factory