MATTER3D, 3D PRINTER FILAMENT PERFORMANCE PETG 1.75MM 1KG GREY

All pictures are for illustrative purposes only.

PID# 160677

35,00 CA$
Free shipping: On orders over $120 within BC
Variants:
Quantité

Request a large quantity quote

Description

Matter3D Performance PETg is made from 100% pure resin. This material is highly durable, high strength, and extremely chemically resistant. Performance PETg is easier to print than ABS or Nylon, but offers many of the same advanced properties as those engineering-grade resins. 

Benefits of PETG Include:

  • Superior chemical resistance when compared to ABS
  • Very low odor while printing
  • Amorphous structure giving it a low, near isotropic shrinkage
  • Low moisture absorption, 3x lower than ABS
  • Wide range of processing temperatures between: 230-260°C
  • Superior ductility vs. ABS

Chemical Resistance of PETG:

Unstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, as well as aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons still dissolve or swell the plastic.

 

______________________________

Matter3D’s Performance PETg is precision extruded and immediately vacuum-sealed before shipping with desiccant for protection against moisture. This product is available in 1 kg spools (2.2 lbs) and can also be ordered on a 1kg Master Spool. Matter3D always recommends drying your filaments before use. 

This filament is ideal for use with practically all desktop 3D printers, such as Makerbot, Prusa, Ender, Flashforge, Anet, Creality, Lulzbot, Makergear, Ultimaker, or any other printer accepting 1.75 mm or 2.85 mm filament.

Proudly compounded and manufactured in Canada!

Performance PETg Technical Data Sheet

Specifications:

Product Name: Performance PETg

Product Code: FIL-1030-00-10-1-GRY

Diameter:

1.75 +/- 0.05mm

2.85 +/- 0.05mm

Weight: 1 kg

Length: 335 m

Density: 1.24 g/cc

Nozzle Size: ≥ 0.15 mm

Nozzle Temp: 230 – 260 °C

Bed Temp: 25 – 75 °C

Bed Prep: Hairspray, Glue Stick, Polyimide (Kapton) surface

Layer Height: ≥ 0.1 mm

Print Speed: ≤ 100 mm/sec

Fan speed: 0 – 30%

Related products