LIPO RIDER PLUS (CHARGER / BOOSTER) - 5V/2.4A USB TYPE C

All pictures are for illustrative purposes only.

PID# 160561

14,50 CA$
Rupture de stock
Variants:
LIPO RIDER PRO
LIPO RIDER PLUS
Quantité

Request a large quantity quote

Description

Attention

Make sure you use a built-in battery protector for your lithium battery or that you can connect a separate battery protector, otherwise it may overcharge or over-discharge the battery.

Slow, slow, snail.

Fast, fast, flash.

Welcome to the era of fast charging! 5V/2A Lipo Rider Plus will greatly increase the charging speed, just like flashing lightning.

 

The Lipo Rider Plus from Seeed is not only a Fast Charger but also a Strong PowerBoost, supports up to 5V/2A charging current, boost output integration, output up to 5V/2.4A, can also output 3.3V /250mA. The 3.3V output is normally on, and the 5V output supports IO control or manual switch, which means you can use 3.3V to supply power for a microcontroller and use the I/O of this microcontroller to control the 5V output, totally programmable. Wow, can’t believe it’s less than $5! 

Simply put, the Lipo Rider Plus can charge the Lipo battery much faster, at the same time it can provide strong power for the slave device. Oops, forgot to introduce the difference between the Lipo rider and the traditional Lipo charger.  

 Lipo Rider VS Lipo Charger 

 As we know, the traditional Lipo Charger can charge the lithium battery. Well, usually they can only charge. But what can a Lipo Rider do?  

Use the battery to power the device

Not only a charger but also a power supply and a booster. With the help of Lipo Rider Plus, you can input a 3.7V lipo battery, and output up to 5V/2.4A via the USB Type-A port. With the on-board switch, you can control the ON/OFF of USB port easily. Meanwhile, we provide the full function pin header, which can output 3.3V/250mA as well. 

Features 

  • Up to 5V / 2A charging current - USB Type C
  • Up to 5V / 2.4A output current - USB Type A
  • Provides 3.3V / 250mA output -  Pin Header
  • Support for shutdown output (IO control/manual switch)
  • Onboard charge status indicator LED + Onboard 4-segment power indicator LED
  • Ultra-small  2.5cm*4.1cm
  • Single-layer layout easy mount.

Related products