3D PRINTER MK2B HEATED BED 12/24V 214X214MM

All pictures are for illustrative purposes only.

PID# 15684

27,00 CA$
Free shipping: On orders over $120 within BC
Quantité

Request a large quantity quote

Description

This heatbed is designed to be compatible with any 3D printer that can accept the RAMPS MK2B version of heatbed. This heatbed has a dual power capability allowing it to be used with 12V or 24V power supply sources. It features a central mounting hole on the front side to allow for three point mounting. This is much easier for bed levelling in comparison to 4 point mounting. First level the side with two holes and fix in place, then level the side with one hole. A glass plate is highly recommended to provide a truly flat surface and rigidity.Additionally, the solder pads have been greatly increased in size,making it much easier and allowing for the use of 1206 surface mount components.But this does not remove the need to use proper strain relief.

Come with resistor and LEDs soldered,basic soldering skills needed to solder the power wire

Dimensions (Outer): 214mm x 214mm

Dimensions (Heat Bed): 200mm x 200mm

Laminate FR4 1.6±0.15mm

2 Layer, 35μm Copper

Power Input: 12V/24V DC

Copper Plated Holes

Related products