LILYPAD MAIN BOARD COMPATIBLE

All pictures are for illustrative purposes only.

PID# 15589

22,00 CA$
Free shipping: On orders over $120 within BC
Quantité

Request a large quantity quote

Description

The LilyPad Iduino is a microcontroller board designed for wearables and e-textiles. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread.

The LilyPad Iduino can be programmed with the Arduino software . *Note*, the LilyPad Arduino should only be programmed with software versions 0010 or higher. You can program it with earlier versions, but all of the time related functions will be off (twice as slow as they should be).

The ATmega168V or ATmega328V on the LilyPad comes preburned with a that allows you to upload new code to it with the Arduino software. You can also bypass the bootloader and program the ATmega through the ICSP (In-Circuit Serial Programming) header.
 
 
Microcontroller                            ATmega328V

Operating Voltage                       2.7-5.5 V

Input Voltage                               2.7-5.5 V

Digital I/O Pins                            14 (of which 6 provide PWM output)

Analog Input Pins                        6

DC Current per I/O Pin                40 mA

Flash Memory                             16 KB (of which 2 KB used by bootloader)

SRAM                                          1 KB

EEPROM                                     512 bytes

Clock Speed                                8 MHz