PANEL MOUNT RJ45 ETHERNET EXTENSION CABLE

All pictures are for illustrative purposes only.

PID# 15078

8,00 CA$
Free shipping: On orders over $120 within BC
Variants:
1ft
3.3ft
5ft
10ft
15ft
Quantité

Request a large quantity quote

Description

This handy Ethernet extension cable will make it easy for you to enclose a device that has an Ethernet port. We think this would be most useful when putting a Beagle Bone, Raspberry Pi, Arduino Ethernet into a box.

The jack half has two mounting 'ears' with 4-40 screws installed, 1" inch / 25mm apart. The ears are flexible so the holes don't have to drilled very precisely. Can be used with box walls up to 0.25" wide. The screws can be put on from the back for 'reverse' mounting if the box thickness is a problem. Entire unit is 12" long (9" cabling between jack and RJ45 Ethernet connector).

  • Panel mount Ethernet 8P socket with Ethernet 8P plug at cable end. Straight-through extension
  • CAT 5e
  • 24 AWG wires
  • 12" long / 31 cm from tip to tip
  • 9" / 23 cm cabling from jack to connector
  • Two 10mm 4-40 mounting screws, 24mm apart
  • Plastic "boot" at Ethernet end is 20mm tall x 33mm wide (20mm where it is smaller behind the mounting flange) x 28mm deep

Specifications

73 Produits

Features

Colour Black
Wire Size 24AWG
7.62mm 0.3m (1ft)
Network Category CAT5E
Wire Pairing UTP

Références spécifiques

Related products