All pictures are for illustrative purposes only.

POLOLU WHEEL 42X19MM PAIR

1849
CA$5.00
  • These white plastic wheels have rubber tires measuring 42 mm (1.65″) in diameter and press-fit onto the 3mm D output shafts on many of our motors, including our micro metal gearmotors and our mini plastic gearmotors with 3mm D-shafts. Teeth on the hub optionally allow a reflectance sensor to be used for encoder feedback. These wheels are sold in pairs.
  • Diameter: 42 mm (1.65″)
  • Width of tire: 19 mm (0.75″)
  • Weight: 19 g (0.66 oz)
  • Shaft type: 3mm “D”

IN STOCK Quantity

Overview

These rugged wheels are designed to press-fit securely onto the 3mm D output shafts of our micro metal gearmotors and 15.5D metal gearmotors. These gearmotors should be mounted onto the side of the hub with the protruding teeth, as shown on the right. The output shaft will slide into the socket easily at first but will achieve a snug fit when pressed through to the other edge of the hub.

The output shafts on our selection of Solarbotics metal gear motors will also fit these wheels, but because they are shorter they will have to be mounted onto the other side of the wheel where the fit is tighter (which means the Solarbotics metal gearmotors will not work with the quadrature encoder associated with this wheel). These wheels will also work in this orientation on our mini plastic gearmotors with 3mm D-shaft outputs.

Our extended micro metal gearmotor bracket is specifically designed to work with this wheel. Please note that the non-extended version of our mounting bracket (product #989) will not work well with this wheel.

Micro metal gearmotor with Pololu wheel 42×19mm and extended bracket.