reFILACTIVE REFLECTIVE FILAMENT 1.75MM 250G GRAY BOTFEEDER

  • -10%
reFILACTIVE REFLECTIVE FILAMENT 1.75MM 250G GRAY BOTFEEDER
All pictures are for illustrative purposes only.

PID# 16563

CA$150.00
CA$135.00/SPL Save 10%
Free shipping: On orders over $120 within BC

1 In Stock

Order now, processed next business day

Quantity

Request a large quantity quote

Description

https://www.youtube.com/watch?v=EIOs6GRoS14

BotFeeder reFilactive Reflective Filament Dimension

SPECIFICATIONS:

Material Grade:   TPE
Diameter Tolerance:   +/- 0.03mm
Roundness Tolerance:   +/- 0.05mm

TRICKS & TIPS:

At BotFeeder we have a well equipped 3d printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.

Extrusion Temperature:   230 to 240C
3D print speed:   15 to 30 mm/sec
Print Bed Temperature:   70 to 80C (Optional)
Layer Thickness:   0.20mm or higher
Nozzle Size:   0.4mm or higher
Build Platform:   For BotFeeder reFilactive we advice to print on a heated bed. After printing, the build plate needs to cool down to about 20-30 C at which point you can remove the printed part.

PROTECTION

To ensure the filament product to your hand is in its top condition, we're taking extra protective measures, including protective film, heavy-duty vacuum seal bag, double air-tight seal, and large pack of desiccant.

BotFeeder Filament Protective Measures

SPOOL

BotFeeder Colour Code for reFilactive & Filament Tracker

DROP TEST

Method:   10 drops from height of 1.2 meters
Result:   Passed

Drop Test from height of 1.2 meters

PACKAGING

Product:   reFilactive Reflective 1.75mm Gray Filament
SKU:   0440

BotFeeder Filament Packaging

IN THE BOX:

1 x 250g of BotFeeder reFilactive Reflective 1.75mm Gray Filament
1 x BotFeeder spool holder
1 x A pack of large desiccant
1 x Vacuumed sealed bag

BotFeeder reFilactive Reflective Gray Filament in the Box

FILAMENT CARE TIPS

Storing Your Filament

Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:
- a dehumidifier cabinet or a dry and circulated area
- room temperature
- avoid direct sunlight or heat source

Selecting A Printer Location

Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.
- Avoid direct sunlight or heat source
- Consistent temperature
- Stable air flow
- Away from furniture for safety

Avoid Tangling Your Filament

When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.

If Filament Gets Damp

Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

QUALITY:

In-house production

All BotFeeder 3d printing filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.

Excellent diameter tolerance

An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3d printing filament, which means you can rest assured that your printer is extruding the exact amount of material.

Packaging

Within minutes of production a spool of BotFeeder 3d printing filament is sealed airtight with a double barrier foil. To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.

In-house testing

The BotFeeder testlab features a wide range of popular 3d printers. We’re continuously testing on our 3d printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3d printer, please contact us at support@botfeeder.ca

The following printers are used in our lab:

Ultimaker Original
Ultimaker 2
Makerbot Replicator 2X
Lulzbot Mini
Original Pursa I3
Solidoodle 3
UFO Standard (Delta & E3D hot-end)
Rapidbot 2
3D Lounge PRO XL

Companies who are interested in having their 3d printer(s) featured in our testlab can contact us at support@botfeeder.ca

Certifications:

To take an extra step for your safety, BotFeeder 3d printing filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).

Material science

BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

Specifications

1 Item

Features

Filament Size 1.75mm
Weight 0.25kg
Colour Grey

Specific References