WIFI REPEATER SIGNAL EXTENDER RANGE BOOSTER AMPL. 2.4GHZ 8W

All pictures are for illustrative purposes only.

PID# 16120

CA$79.50
Free shipping: On orders over $120 within BC

1 In Stock

Order now, processed by tomorrow

Variants:
4W
8W
Quantity

Request a large quantity quote

Description

Description: 
Low-noise receive gain. 
Signal activity LED indicates 
High Gain, High Value, High Performance. 
Maximum output power of 8000mW by the Booster. 
Plug-and-play, Easy installation, no driver needed. 
Ideal for increase the 2400-2500Mhz frequency devices. 
Increase the effective range and coverage area of your Wi-Fi network. 
Simply attach the booster in between the standard antenna on a wireless router or wireless access point and watch your range grow. 
The amplified wireless signal may even penetrate complex environments with many walls and obstacles. 
Ideal for use with 2.4GHz Wireless LANs, Support 802.11b, 802.11g, 802.11n (2.4Ghz mode only). 
NOTE: The item need to connect to a Access Point or Router which is NOT included.

Specifications:
Operation Range: 2400-2500 MHz. 
Operation Mode: Bi-directional, half-duplex, Auto-Switching via carrier sensing. 
Frequency Response: ? 1dB over operation range. 
Input Power: 3dBm (Min.)-20dBm (Max.). 
Input Power 5 ~ 20 dBm. 
Optimal Input Power: 9 ~ 13 dBm. 
Output Power: 8000mW/39dBm nominal for 802.11b/11Mbps. 
Connector: SMA Receptacle, 50 ohm. 
Transmit Gain: 17dBm nominal. 
Receiver Gain: 11dBm. 
Receive Noise Figure: 3.0dBm nominal. 
Operating Temperature: -40 to 70 degree. 
Operating Humidity: Up to 95% relative humidity. 
Material: Cast Aluminium. 
Size:10.3cm x 7.7cm x 2.1cm 

Package Included:
1 x Signal Booster
1 x Power plug 
1 x SMA cable 
1 x 6Dbi antenna

Instruction:
Step 01: Remove the Antenna from the Wireless Router / Access Point.
Step 02: Use this cable (RG316) to connect Amplifier 'input' port with router 'output' port: note that cable is in standard spec.
Step 03: Connect the antenna with 'output' port of Amplifier.
Step 04: Power the amplifier with the matching source adapter: DC 12V.