ARDUINO PROTOSHIELD W/ MINI BREADBOARD KIT
ARDUINO PROTOSHIELD. Make your own shield using this prototyping shield. It comes with headers, some resistors, tack switches, and LEDs. Click on one of the colours below to choose your colour.
ARDUINO PROTOSHIELD. Make your own shield using this prototyping shield. Come with headers, some resistors, tack switches, and LEDs.
This board works with UNO NG, Diecimila and Duemilanove Arduinos. Can be used with a Leonardo but it will not break out the hardware SPI pins(they're only on the ISP connectors underneath) or the IOREF/SDA/SCL pins. However, the SDA/SCL pins on the Leonardo are also on digital #2 and #3 so you can still use them by connecting to #2 and #3
It has a nice standard 2.54mm x 2.54mm (0.1"x 0.1") prototyping grid with big pads A IC pattern for adding DIP ICs up to 20pins power rails down the middle and sides, a reset button and extra general use button 2 3mm general use LEDs as well as 2 matching resistors. The ICSP header is up top if you like to upload to your Arduino using a programmer A surface-mount chip area for up to 14 SOIC size parts compatible with either tiny breadboards or 'standard' breadboards with the rails removed. Every pin is brought out, including the 3V and reset header pins 2 x 0.1uF capacitors on either side for extra power stability.
Mini breadboard available. PID: 10314. Can be mounted on the prototyping board.
Product ID: 15504
Product ID: 2038
Product ID: 15100
Product ID: 15576
Product ID: 15237
Product ID: 111171
Product ID: 11125
Product ID: 1826
Product ID: 53861
Product ID: 15362