RASPBERRY PI GPS MODULE, 66CH, AGPS, USB PORTS L80-39

All pictures are for illustrative purposes only.

PID# 1840

CA$55.00 EACH
Out of Stock
Quantity

Request a large quantity quote

Description

  • PPS output can be used to coordinate time with satellite
  • Internal patch antenna works well outdoors
  • EASY, advanced AGPS technology without external memory
  • Time service application can be achieved by PPS sync NMEA feature
  • Built-in LNA for better sensitivity
  • RTC battery-compatible

With L80-39 GPS Chip inside, this US GPS L80-39 GPS Module for Raspberry Pi will help you communicate via satellite with UART or USB. It includes 66 search channels and 22 simultaneous tracking channels which helps acquire and track satellites in the shortest time outdoors. It uses chip CP2102 for the USB to UART bridge which works faster and is more stable.

US GPS L80-39 GPS Module for Raspberry Pi

It is compatible with all models of Raspberry Pi which includes Raspberry Pi 3/Pi 2/B+/A+/B/A/Zero.

Specifications

  • Working Voltage: 4.5-5.5V
  • 100mA current draw to startup
  • Maximum Current: 100mA MAX
  • Working Temperature: -40 ~ +85°c
  • GPS: L80-M39
  • Patch Antenna Size: 15.0 x 15.0 x 4.0mm
  • Position Accuracy:<2.5M CEP
  • Velocity Accuracy:<1.0m/s
  • Warm/cold start without ESEY: <35s
  • Warm/cold start with ESEY: <15s
  • Acquisition sensitivity: -148dBm
  • Tracking sensitivity: -165dBm
  • Update rate:1Hz (Default) up to 5Hz
  • Baud Rate: 4800~115200 bps, 9600bps default
  • Protocols: NMEA 0183
  • Mount Cable: 1x8 Stacking Header USB micro data cable

Dimensions

US GPS L80-39 GPS Module for Raspberry Pi

16.6x26x18.6(mm)

It is suggest that you do not connect the GPS module with Raspberry Pi directly with GPIO Pins.

The easiest way to get started is using a USB-to-TTL cable to connect GPS module and Raspberry Pi, and you can wire it up like this chart:

GPS module Wire color
VCC Red wire
GND Black wire
TXD Green wire
RXD White wire

Related products