BARE CONDUCTIVE, TOUCH BOARD SKU-5013

All pictures are for illustrative purposes only.

PID# 183794

CA$75.00 EACH
Out of Stock
Quantity

Request a large quantity quote

Description

Straight out of the box, the Touch Board enables you to turn any conductive object into a sensor, which can be used to trigger a sound. The board has 12 of these capacitive electrodes and it can be reprogrammed to either make use of the on-board MP3 decoder and MIDI synthesizer or to be used as a USB Serial, MIDI interface and mouse and keyboard.

The Touch Board is a microcontroller board based on the Arduino Leonardo, using the ATmega32U4, and includes a 3.5mm audio jack. Sounds can be stored on the board via a microSD card and you can reprogram the Touch Board using the Arduino IDE and a micro USB cable.

Contents:
1 x Touch Board
1 x microSD card

Not included: micro USB cable

Technical Information:

  • Microcontroller: Microchip ATmega32U4
  • Audio output: 15mW into 32ohm via 3.5mm stereo socket
  • Remove storage: Up to 32GB via micro SD card
  • Operating voltage: 5V DC
  • Max output current (5V rail) 400mA (100mA at start up)
  • Capacitive touch electrodes: x12 (8 of which can be configured as digital I/O)
  • Digital I/O pins: x12 (5 of which can be dedicated but can be unlinked via solder blobs)
  • PWM channels: x7 (shared with digital I/O pins)
  • Analog input channels: x12 (shared with digital I/O pins)

You may also like

Related products

Related articles