ESP32, WIFI AND BLUETOOTH MODULE, /W MICRO USB POWER
There are two versions of this board, with 30 and with 36 GPIOs. Both work in a similar way. The pins are labeled at the top of the board. It comes with on-board REST (EN) and BOOT buttons. Additionally, it comes with USB-to-UART interface, so that you can easily program it using Arduino IDE or other development environment, and comes with voltage regulator circuit. The board can be powered using the micro-USB connector, and it doesn’t come with battery connector.
ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters,
and power management module. The entire solution takes up the least amount of printed circuit board area.
This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology,
power and RF properties best, which is safe, reliable, and scalable to a variety of applications.
- High performance-price ratio
- Small volume, easily embeded to other products
- Strong function with support LWIP protocol, Freertos
- Supporting three modes: AP, STA, and AP+STA
- Supporting Lua program, easily to develop
- Development Board: https://github.com/Nicholas3388/LuaNode
ESP32 Forum: https://www.esp32.com/
1 x ESP32 Development Board
Product ID: 18408
Product ID: 15069
Product ID: 18108
Product ID: 15590
Product ID: 16785
Product ID: 15526
Product ID: 15591
Product ID: 15420
Product ID: 15837
Product ID: 1844