3D FILAMENT FILAGLOW GLOW IN THE DARK 1.75MM 700G BOTFEEDER
Material: Glow in the Dark
Filament Weight: 700g
Made in: Taiwan
Material Grade: NatureWorks 4032D
Diameter Tolerance: +/- 0.03mm
Roundness Tolerance: +/- 0.05mm
TRICKS & TIPS:
At BotFeeder we have a well equipped 3d printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Extrusion Temperature: 205 to 225C
3D print speed: 15 to 100 mm/sec
Print Bed Temperature: 70 to 80C (Optional)
Layer Thickness: 0.20mm or higher
Nozzle Size: 0.3mm or higher
Build Platform: For BotFeeder Filaglow we advice to print on a heated bed. After printing, the build plate needs to cool down to about 20-30 C at which point you can remove the printed part.
To ensure the filament product to your hand is in its top condition, we're taking extra protective measures, including protective film, heavy-duty vacuum seal bag, double air-tight seal, and large pack of desiccant.
Method: 10 drops from height of 1.2 meters
Product: Filaglow Glow in the Dark 1.75mm Natural Filament
IN THE BOX:
1 x 700g of BotFeeder Filaglow Glow in the Dark 1.75mm Natural Filament
1 x BotFeeder spool holder
1 x A pack of large desiccant
1 x Vacuumed sealed bag
FILAMENT CARE TIPS
Storing Your Filament
Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:
- a dehumidifier cabinet or a dry and circulated area
- room temperature
- avoid direct sunlight or heat source
Selecting A Printer Location
Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.
- Avoid direct sunlight or heat source
- Consistent temperature
- Stable air flow
- Away from furniture for safety
Avoid Tangling Your Filament
When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.
If Filament Gets Damp
Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.
All BotFeeder 3d printing filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.
Excellent diameter tolerance
An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3d printing filament, which means you can rest assured that your printer is extruding the exact amount of material.
Within minutes of production a spool of BotFeeder 3d printing filament is sealed airtight with a double barrier foil. To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.
The BotFeeder testlab features a wide range of popular 3d printers. We’re continuously testing on our 3d printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3d printer, please contact us at email@example.com
The following printers are used in our lab:
Makerbot Replicator 2X
Original Pursa I3
UFO Standard (Delta & E3D hot-end)
3D Lounge PRO XL
Companies who are interested in having their 3d printer(s) featured in our testlab can contact us at firstname.lastname@example.org
To take an extra step for your safety, BotFeeder 3d printing filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).
BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.
Product ID: 16548
Product ID: 15862
Product ID: 16554
Product ID: 16561
Product ID: 16552
Product ID: 16559
Product ID: 153872
Product ID: 16557
Product ID: 16549
Product ID: 153884