ARDUINO ADAPTER FOR RASPBERRY PI

All pictures are for illustrative purposes only.

PID# 15648

CA$45.00
Free shipping: On orders over $120 within BC

3 In Stock

Order now, processed by tomorrow

Quantity

Request a large quantity quote

Description

Arduino is a massive ecosystem, if there's a way for the Raspberry Pi GPIO interface to adapt to Arduino pinouts, it is possible to use the Pi together with vast Arduino shields and hardware/software resources. The ARPI600 is just intended for this.
What's more, the ARPI600 also support XBee modules, make it easy to add wireless feature to your great project.
 
Supported Pi:
Raspberry Pi 1 Model A+
Raspberry Pi 1 Model B+
Raspberry Pi 2 Model B
 
Features:
  • Compatible with Arduino UNO, Leonardo, easy to connect with various Arduino shields
  • XBee connector for connecting various XBee modules
  • Sensor interface for connecting various sensors
  • Onboard USB TO UART for serial port debugging, also can be configured as XBee USB adapter
  • Onboard ADC, 10 bit, 38KSPS, 11 channels (6 channels for Arduino interface, 5 channels for sensors)
  • Onboard RTC
Specification:
1.Arduino connector : for connecting Arduino shields
1.2.ICSP interface : Arduino ICSP
2.XBee connector : for connecting XBee communication modules
3.Sensor interface : for connecting sensors
4.Raspberry Pi connector : for connecting Raspberry Pi
5.USB TO UART
6.TLC1543 : AD converter
7.PCF8563 : RTC
8.CP2102
9.32.768KHz crystal : for RTC
10.Power indicator
11.XBee state LED
12.XBee and Arduino interface RESET button
13.XBee EASYLINK button
14.RTC battery holder : for CR1220 button battery
15.TLC1543 reference voltage configuration jumper
16.RTC jumper
17.UART jumper
when connecting P_RX and CP_TX, P_TX and CP_RX respectively, USB TO UART is connected to Raspberry Pi serial port
when connecting XB_RX and CP_TX, XB_TX and CP_RX respectively, USB TO UART is connected to XBee serial port
when connecting XB_RX and P_TX, XB_TX and P_RX respectively, Raspberry Pi serial port is connected to XBee serial port
18.Arduino AD selection jumper
short 2 and 3 : Arduino A0-A5 as AD input
short 1 and 2 : Arduino A0-A5 as digital control
19.Arduino I2C selection jumper
short the jumper : Arduino A4-A5 as I2C control (the A4-A5 of Arduino AD selection jumper should be opened)
20.Arduino SPI selection jumper
short 1 and 2 : Arduino D11-D13 as SPI control (default)
short 2 and 3 : Arduino D11-D13 as digital control
 
 
Documents:
Please visit the wiki page for more info about this product.