ACCELEROMETER AND GYRO SENSOR I2C MPU-6050 GY521
All pictures are for illustrative purposes only.
  • ACCELEROMETER AND GYRO SENSOR I2C MPU-6050 GY521

ACCELEROMETER AND GYRO SENSOR I2C MPU-6050 GY521

15544
CA$14.50

1. Chip: MPU-6050 
2. Power supply: 3v-5V power 
3. Gyroscope range: +/-250 500 1000 2000°/s 
4. Acceleration range: +/-2 +/-4 +/-8 +/-16g 
5. Communication: standard IIC communication agreement 
6. Chip built-in 16 bit AD converter, 16 bits of data output 
7. Pin spacing 2.54mm

IN STOCK Quantity

This sensor board has a voltage regulator. When using 3.3V to the VCC the resulting voltage (after the onboard voltage regulator) might be too low for a good working I2Cbus. It is preferred to apply 5V to the VCC pin of the sensor board. The board has pull-up resistors on the I2C-bus. The value of those pull-up resistors are sometimes 10k and sometimes 2k2. The 2k2 is rather low. If it is combined with other sensor board which have also pull-up resistors, the total pull-up impedance might be too low.