Product ID: 10897
COMPACT SWITCHING PWR SUPPLY SELEC. O/P 3-12VDC
Its a switching wall adapter where you can easily change the voltage! It's like a benchtop supply you can take with you anywhere.
This model is 10 Watts and has 6 selectable outputs ranging from 3V to 12VDC and up to 1.5A output. It has a 2-prong plug, but takes 110VAC to 240VAC so you can use it anywhere with a simple plug adapter.
It comes with a range of tips, such as 2.5mm mono, 3.5mm mono, 5.5mm/2.5mm, 2.5mm/2.1mm, 4mm, etc. You can also change it from center positive (most common) to center negative (less common but seen in some audio gear) You could use this with just about any device or project, it's very handy!
- Multi changeable plug DC-cord.
- Universal AC input 100V to 240V, 50Hz/60Hz
- Universal AC input plug available (BSI, USA, Europe, Aust)
- 6 selectable outputs: 3V-12V MAX. 1500mA.
- Selectable plugs: 2.5mm mono, 3.5mm mono, 3.0/1.0mm, 3.5/1.35mm, 4.0/1.7mm, 5.5/2.1mm, 5.5/2.5mm, 5.5/1.5mm
- Over load, over current, over heat protection.
- International approval CE EN60950, UL1950, CSA22.2 No.950.
- EMC approval EN55022.
- Extra low consumption during standby (about 8% of linear adapter).
- Weight: 86g approximately.
- Small size: 67x29x74mm.
- Cable length: 1.54m / 60 3/4"
|Below is the voltage current table and avoid higher loads!|
|Rate output Voltage||3V||4.5V||6V||7V||9V||12V|
|Max. output current at 220V||1.5A||1.2A||1.0A||0.9A||0.8A||0.7A|
|Max. output current at 110V||1.5A||1.2A||1.0A||0.9A||0.8A||0.6A|
Product ID: 10768
Product ID: 1450
Product ID: 14553
Product ID: 21117
Product ID: 16002
Product ID: 17152
Product ID: 10574
Product ID: 16655
Product ID: 10773