STEPPER MOTOR 125 oz.in (200 steps) 2A 57BYGH420-2

All pictures are for illustrative purposes only.

PID# 10528

CA$55.00
Free shipping: On orders over $120 within BC

2 In Stock

Order now, processed by tomorrow

Quantity

Request a large quantity quote

Description

 This is a Unipolar stepper, meaning the Stepper motors are great motors for position control. They can be found in desktop printers, plotters, 3d printers, CNC milling machines, and anything else requiring precise position control. Steppers are a special segment of brushless motors. They are purposely built for high-holding torque. This high-holding torque gives the user the ability to incrementally “step” to the next position. This results in a simple positioning system that doesn’t require an encoder. This makes stepper motor controllers very simple to build and use.

These stepper motors, in particular, are used with the Shapoko CNC machine and offer 125 oz.in of torque and 200 steps per revolution. Additionally, each motor has been equipped with extra long 600mm AWG22 wires, making them ideal for CNC applications.hat if you are going to drive it with a bipolar stepper driver, you can ignore the yellow and white leads and drive it using the remaining four.

Features:

  • Step Angle (degrees) : 1.8
  • 4-Phase
  • Rated Voltage: 3V
  • Rated Current: 2A/Phase
  • ¼" Diameter Drive Shaft
  • Holding Torque: 90N.cm
  • NEMA 23 form factor

Step Accuracy: +-5%
Temperature Rise: 80C
Ambient Temperature Range: -20C ~ +50C
Insulation Resistance: 100M ohms min. 500VDC
Dielectric Strength 500VAC 1 minute

Step Angle Motor Length Voltage Rating Current Rating Phase Resistance Phase Inductance Holding Torque Detent Torque Rotor Inertia Lead Wire Motor Weight
1.8 degrees 56mm 3.6V 2A 1.8ohm 2.5mH 882.6mNm 0.039mNm 300gcm^2 NO.6 0.7kg