FEMTOBUCK LED DRIVER

FEMTOBUCK LED DRIVER FEMTOBUCK LED DRIVER
All pictures are for illustrative purposes only.
FEMTOBUCK LED DRIVER FEMTOBUCK LED DRIVER

PID# 16229

CA$12.50
Out of Stock
Quantity

Request a large quantity quote

Description

For the FemtoBuck, input voltage covers a full 36V range of the AL8805 driver. Since the FemtoBuck is a constant current driver, the current drawn from the supply will drop as supply voltage rises. In general, efficiency of the FemtoBuck is around 95%, depending on the input voltage. On board each FemtoBuck you will find two inputs for both power input and dimming control pins and an area to install a 3.5mm screw terminal. Finally at either side of the board you will find small indents or “ears” which will allow you to use a zip tie to secure the wires to the board after soldering them down. This version of the FemtoBuck is equipped with a small solder jumper that can be closed with a glob of solder to double the output current from 330mA to 660mA.