Product ID: 6272
This is a slider-type wall plate volume control for speaker systems with power ratings of up to 75 watts per channel and impedance ratings of 4 to 16 ohms. This slider control can be set to one of twelve positions, including the minimum (off) and maximum volume settings.
Product ID: 6273
This is a rotary-type wall plate volume control for speaker systems with power ratings of up to 100 watts per channel and impedance ratings of 4 to 16 ohms. This rotary control can be set to one of twelve positions, including the minimum (off) and maximum volume settings.
Product ID: 15295
The Pro Trinket 3V uses the Atmega328P chip, which is the same core chip in the Arduino UNO/Duemilanove/Mini/etc. However, it uses 3V logic and 12MHz clock which means it's good when you want a lower-power and lower-voltage setup.
Product ID: 15296
The Pro Trinket 5V uses the Atmega328P chip, which is the same core chip in the Arduino UNO/Duemilanove/Mini/etc. at the same speed and voltage. So you'll be happy to hear that not only is Pro Trinket programmable using the Arduino IDE as you already set up, but 99% of Arduino projects will work out of the box!
Product ID: 15297
Adafruit Bluefruit LE (Bluetooth Smart, Bluetooth Low Energy, Bluetooth 4.0) nRF8001 Breakout allows you to establish an easy to use wireless link between your Arduino and any compatible iOS or Android (4.3+) device.
Product ID: 15298
This is the cutest little microSD card reader/writer - but don't be fooled by its adorableness! It's wicked fast and supports up to 64 GB SDXC cards! Simply slide the card into the edge and plug it into your computer. No drivers are required, it shows up as a standard 'Mass Storage' device under any OS. You can swap cards while the USB port is kept...
Product ID: 15415
If you've ever wanted to dive into the electronics world but were afraid to try, then this is the perfect kit for you. A fun, beginner's kit, it includes a fully illustrated guide that will familiarize you with a wide range of electronic components while you create small, simple, and easy-to-assemble circuits.
Product ID: 1109
Banana Pi is a single-board computer. Banana Pi targets to be a cheap, small and flexible enough computer for daily life. Built with ARM Cortex-A7 Dual-core CPU and Mali400MP2 GPU, and open source software, Banana Pi can serve as a platform to make lots of applications for different purposes.
Product ID: 10997
The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply...
Shipping and Free Pickup (only in Greater Vancouver) is available for all our products!
If you need any assistance with the website, have questions, or suggestions, call us at: 604 - 875 - 1993.
We accept Paypal and all credit cards supported by Paypal: Visa, MasterCard, and American Express.