STEP-DOWN DC-DC POWER SUPPLY KIT W/ CASE AND DISPLAY

STEP-DOWN DC-DC POWER SUPPLY KIT W/ CASE AND DISPLAY
All pictures are for illustrative purposes only.

PID# 714629

CA$30.00 EACH
Out of Stock
Quantity

Request a large quantity quote

Description

Features: 

Input voltage : 5-36V
Output voltage :1.25-32V (continuously adjustable,default output 17V.)
Output Current : 5A MAX( Please use it within 4.5A)
Output Power: Max 75W ( Please use it within 50W. if the pressure difference is big,please reduce power)
Operating temperature: -40 to +85 ° C
Operating frequency: 180KHz
Conversion efficiency : up to 96%
Short circuit protection: Yes
Overtemperature protection: (automatically shut off the output after overtemperature)
Input reverse polarity protection: No, (if necessary, please in input
String into high current diode)
Installation: 4pcs 3mm screws
Wiring:(solder terminals) V-IN is the input, V-OUT is the output

Usage:
1. Use as an ordinary buck module with overcurrent protection capabilities;
2. Use as a battery charger;
3. Use it as a constant current LED driver module.

Note:
1. If the module can not be adjusted, the output voltage is always equal to the input voltage." When you encounter this problem, rotate the potentiometer counterclockwise several turns to adjust the output voltage. Because the factory default output voltage is 17V.
2.Module output terminal string has a current sampling resistor, there will be 0-0.2V voltage drop after connected to the load, it is a normal phenomenon.
3.If its output is more than 3A/35W, please enhance heat dissipation!