POE INJECTOR ADAPTER FOR 802.3 FOR IP CAMERA 48V 0.5A
Warning: Low quantities left!
The complete Passive Power over Ethernet Kit contains two pieces - INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices. Passive Power over Ethernet SET is compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. The devices can be supplied up to 50V. (The power adapter is not included - it is possible to use the power adapter of the powered device as access point, IP camera etc.) Passive PoE's range is normally form 30-40 metres/100- 130 ft (the real distance depends on the power supply, type of cable and powered device).
Passive PoE- means that input and output voltage are equal.
Transforms Non PoE devices to PoE enabled.
Supports 5V, 12V, 24V, 48V.
Power supply required for power input - simply use the power supply (wall transformer) that is provided with the device you are trying to power.
PoE injector and splitter kit with 5.5 * 2.1 mm DC jack / plug.
Use with IP security camera, wireless access point and other devices.
Can work up to30-40 metres/100-130ft (depending on the quality of the cable and the power draw of the device).
Injector: RJ45 Male + Power In to RJ45 Female
Splitter: RJ45 Female to RJ45 Male + Power Out
Supports: 5V, 12V, 24V, 48V
Power plug / jack: 2.1 * 5.5mm / 0.9 * 2.2in
Power Pins: 4,5 + and 7,8
Length:18cm / 6.9in
Transmission distance: 30-40 m / 100-130 ft
Application: WLAN, routers, switches, internet telephony, security monitoring etc
Product size: 17.5 * 1.9 * 1.8cm / 6.8 * 0.7 * 0.7in
Product weight: 53g / 1.86oz
Package size: 22.3 * 9 * 2.2cm / 8.8 * 3.5 * 0.9in
Package weight: 54g / 1.9oz
1x PoE injector cable
1x PoE splitter cabl