OUTDOOR SOLAR POWERED MOTION LIGHT W/ 16 LED 2200mAH
OUTDOOR SOLAR POWERED FLOOD LIGHT 0.8W 150 LUMENS 6.5K 4 LED
POE INJECTOR ADAPTER FOR 802.3 FOR IP CAMERA 48V 0.5A
OUTDOOR SOLAR POWER GARDEN YARD FENCE LAMP 2PCS
SOLAR POWERED OUTDOOR LIGHT W/ MOTION SENSOR FLAT TOP 800mAh
WIRELESS CORLDESS STAND INDUCTION SPEAKER BLACK
FOLDABLE SOLAR USB CHARGER POWER BANK 15W 2.4A
3D PRINTER FILAMENT PLA 1.75MM 1KG WHITE HONGDAK
WIFI SIGNAL AMPLIFIER BOOSTER 4W 2.4Ghz
WIFI REPEATER SIGNAL EXTENDER RANGE BOOSTER AMPL. 2.4GHZ 8W
4 PORT USB 2.0 AUTO SHARING SWITCH HUB
USB CHARGER PANEL POWER BANK BATTERY 5W 1A 2600mAh
KIT, UNASSEMBLED 7W MONO AUDIO AMPLIFIER K4001
VERTEX NANO 3D PRINTER KIT
SATA CABLE 0.15M TO MOLEX 4P
RNB8-5L NON INSULATED RING CONNECTORS 10PCS
RNB5.5-5 NON INSULATED RING CONNECTORS 10PCS
EN0508 NON INSULATED CORD END TERMINAL 10PCS
1 GANG WALL PLATE
POTENTIOMETER, 250K, LINEAR, 24MM, ROUND, LUGS, 3RD PIN OPEN
LED ALARM INDUCATOR 12VDC WHITE
BRACKET FOR ADJUSTABLE IR DISTANCE SENSOR
DIGITAL CALIPER 6" 150MM RDC-1150
INLINE ON/OFF SLIDE SWITCH WHITE
POWER BAR 6 OUTLETS W/ SURG PROTECTION AND 2 USB PORTS
XT60 LI-PO BALANCE CHARING BOARD 2-6S PARALLEL CONNECT PLATE
4 CHANNEL BI-DIRECTION LOGIC LVL CONVERTER SPI UART
NICHROME WIRE 0.9MM 2.2OHM/M HEAT WIRE PER/M
STEMTERA ARDUINO COMPATIBLE DEV BREADBOARD (WHITE)
DIGITAL PANEL METER AC/DC FREQUENCY 1-1999HZ
PORTABLE BATTERY BANK 50000MAH SOLAR W/ USB LIGHT
NICKEL SOLDERING TAP, 1X4MM, PER FOOT
USB CABLE TO MULTIPLE POWER PLUGS
AUDIO CABLE, 2 RCA(M) TO 2 RCA(M), 0.5M, Q401
IDE / IDC EDGE PLUG CONNECTOR 60PIN
LAPTOP IEC C5 AND NEMA FLAT AC POWER CABLE CORD CSA 6FT
Specifications Rolls of slip-on contacts, 140mm apart UL1007, 26 AWG...
Specifications Rolls of slip-on contacts, 140mm apart UL1007, 24 AWG...
DIGITAL CALIPER 6" 150MM RDC-2150
IC SOCKET 24-PINS WIDE 2PCS/PKG
XLR 3-PIN (F) NEUTRIK NC3FXX
PUSH BUTTON ON/OFF WHITE LED 24V VANDAL-RES(L)
PUSH BUTTON MOMENTARY WHITE LED 24VDC VANDAL-RES(L)
SIREN, SKODA, RED, S-100H, DC12V (CONTINUOUS TONE)
LED INDICATOR LIGHT RBG DC12V
LED INDICATOR LIGHT RGB DC24V
LED AUTO BREAK LAMP 1157-5050-18SMD, WARM WHITE
RESISTORS 1/4W 3.6MEG 5% 10PCS
RESISTORS 1/4W 1.3MEG 5% 10PCS
RESISTORS 1/4W 910K 5% 10PCS
3.5MM HEADPHONE AND MIC PLUG TO 4-POLE JACK
IEC POWER CABLE 3 CORD LINE 6FT (TYPE G PLUG)
LBD MARKING SYSTEMS V-6600
FINGER GUARD 120MM PLASTIC
TRANSIENT VOLTAGE SUPPRESSORS (TVS) 18V 600W P6KE18A DIODE
IC J111 TRANSISTOR JFET N-CHANNEL 35V 50mA TO-92
AUDIO BRIDGE AMPLIFIER TDA7396 45W
BRAIDED SLEEVING, F6 1", F6N1.00CW CLR/WHITE
BRAIDED SLEEVING, PET 3/8", PTN0.38WH, WHITE
NEUTRIK POWER CON OUT CHASSIS NAC3MPB-1 GREY
XLR 3-PIN (M) NEUTRIK NC3MXX
FLEX CABLE FOR RASPBERRY PI CAMERA - 200MM OR 8 INCHES
FLEX CABLE FOR RASPBERRY PI CAMERA - 300MM OR 12 INCHES
ROBOTIC FUNCTIONAL KIT
Product ID: 15144
This set contains two Boxing Fighters, each with its own 2-channel remote control. Compete with a friend for the title of boxing fighter champion! Assembly of this robot kit is easy and educational.
Product ID: 10658
The kit demonstrates clean energy and the concept of an environmentally friendly fuel cell vehicle. A great chance for children to learn about alternative energy sources. Just add salt water to power it. Once the fuel cell module is activated with the salt water, it can power the car for about 4 hours continuously. Comes as a kit.
Product ID: 15500
Stereo audio amplifier boosts sound 50 times. Great for the-hearing impaired (e.g. when watching TV), as a gadget, science project, etc. With volume control and on/off switch. Note: This item is not preassembled. Soldering is required
Product ID: 15235
MAKEY MAKEY - STANDARD KIT. Using the MaKey MaKey you can make anything into a key (get it?) just by connecting a few alligator clips. The MaKey MaKey is an invention kit that tricks your computer into thinking that almost anything is a keyboard. This allows you to hook up all kinds of fun things as an input. For example, play...
Product ID: 15552
A small kit that can build a metal detector to find metal objects in a wall, ceiling or floor. An LED indicates if a metal object is detected and there is extra room on the circuit board to add a buzzer if sound indication is needed.
Product ID: 4155
Dual gearbox from Tamiya. This is an excellent way to get started quickly with robotics! You may have read many websites about servos, gear head motors, DC motors, stepper motors, and the pit-falls associated with each. We swear by these gearboxes because of their price, their ease in assembly, and the ability to be controlled by low-cost motor driver ICs.
Product ID: 4166
This set includes a plastic plate with an 11x31 mm grid of 3 mm holes spaced 5 mm apart, which provides space for many mechanical connections. The two included eight-hole angle brackets can connect the plate to additional Universal Plates or can serve as a mounting point for an axle.
Product ID: 4177
These are different wheel combinations for the Tamiya twin gear box. All tire types press-fit directly onto the Tamiya axel without the need for glue or screws. Simple assembly is required for all types. Mix and match to create some very peculiar looking robots.
Product ID: 15146
The Mechanical Blowfish is the first water based Tamiya Robocraft. It is propelled forward by a left-right moving tail fin rotated driven by a crank and linkage rod.
Product ID: 15145
The Line Tracing Snail is an excellent, low-cost robot for a new robotics enthusiast that has no previous experience with robots or electronics. All electronics are completely pre-assembled, and mechanical assembly is very straightforward. The snail has two speeds, and for added fun and entertainment, the eye stalks wiggle back and forth as the robot runs.
Product ID: 15127
This kangaroo-robot hops forward by kicking its rear legs simultaneously. When walking slowly, it relies on its front legs, and when running quickly, it moves upright, using its tail for balance.
Product ID: 15126
This four-legged Mechanical Giraffe walks when motor rotation is transferred to the legs via crank plates and linkage rods.
Product ID: 15124
The Sliding Ladybug is smoothly propelled by three vibrating metal rods, and its direction and speed can be easily altered by changing the orientation of the leg rods. The Sliding Ladybug features a colorful body and easy assembly.
Product ID: 15121
Tamiya’s wall-hugging mouse is a fun and easy-to-build kit that’s great for new robot enthusiasts, and it can serve as a hackable robot for more advanced users. The mouse has no digital electronics; rather, a simple wire bumper along its side directs current to one of two motors to keep the mouse moving along the wall. The mouse features a hard plastic...
Product ID: 15122
Tamiya’s wall-hugging ladybug is a fun and easy-to-build kit that’s great for new robot enthusiasts, and it can serve as a robot for more advanced users. The ladybug has no digital electronics; rather, a simple wire bumper along its side directs current to one of two motors to keep the ladybug moving along the wall. The ladybug features a hard plastic...